ProjectWise 365 increases the speed and quality of collaboration with a set of 100% SaaS-based, instant-on services, enabling teams to: Obtain information faster by storing, finding, and sharing information from your web browser or Microsoft Teams environment. Accelerate design reviews by capturing and managing feedback on 2D and 3D designs for a faster resolution of issues. Better manage contractual exchanges by automating exchanges and reviews to shorten approval cycles and reduce risks.
↧
Wiki Page: ProjectWise 365
↧
Wiki Page: E365 Usage
Purpose This report is in preview mode and is only open to select accounts. Shows your Bentley application usage and spend specific to the E365 billing program. This report is only available to accounts that are on the E365 billing program . This report defaults to the current quarter. All usage beginning with 2019 Q4 is included. All Gross and Net amounts displayed are pre-tax . Roles Users with at least one of the following roles for an E365 account are able to access the report: Admins Co-Admins Access Go to the Subscription Analytics Click on E365 Usage . Filters Name Description Country CountryISO Usage Quarter Calendar quarter in which the application usage took place. Only one quarter may be selected at a time. Product Product with ProductID Feature String Feature String Persona Unique persona attributed to the usage. Depending on the user's Connected status, this will either be an email address or a machine name. Connection Status Indicates if the machine has gone through the process to become Connected Filter by Allocation Group Toggle that will display Allocation Group in the results and displays the Allocation Group filter. Allocation Group Allocation Group. Only allocation groups assigned directly to the IMS user will be present in this report. Layout - KPIs Across the top of the page are three Key Performance Indicators. Name Description Prior Quarter Spend The Net Spend of the closed quarter prior to the Usage Quarter selection. Current Quarter Spend The Net Spend of the Usage Quarter selected. Projected Current Quarter Spend The Projected Net Spend of the Usage Quarter selected. This is only available for the current quarter after the first 30 days have passed. It is not available for closed quarters. Layout - Spend by Quarter Displays the cumulative Net Spend over the quarter of the Usage Quarter selected and the prior closed quarter. Name Description Prior Quarter Spend The cumulative Net Spend of the closed quarter prior to the Usage Quarter selection. Current Quarter Spend The cumulative Net Spend of the Usage Quarter selected. Today Marks where today's date is on the Current Quarter Spend line. Layout - Connected Users Displays how many of your E365 users have become Connected out of total E365 users for the selected usage quarter. Name Description Connected Users The number of Personas that were logged in as IMS Users Total Users The number of Personas that are not logged in IMS Users. Layout - Spend by Quarter A flexible chart which displays your Net spend and allows you to select between Application, Country, and Persona. Name Description Quarter Spend The Net Spend of the selected usage quarter. Application Application. This is the default selection. Country CountryISO Persona Unique persona attributed to the usage. Depending on the user's Connected status, this will either be an email address or a machine name. Layout - Historic Spend The Net Spend of every quarter from 2019 Quarter 4 forward. If you have toggled on the Filter by Allocation Group, the stacks will be distributed according to the Allocation Groups. Name Description Spend The Net Spend. Usage Quarter Calendar quarter in which the application usage took place. Allocation Group Allocation Group if the Filter by Allocation Group has been toggled to on. Layout - Custom Chart A custom stacked bar chart which displays your Spend from the selected Usage Quarter and allows you to choose the X-axis and the stack dimensions. The default selections are Country and Application. Other options include Allocation Group, Persona, and Usage Date. Some of these dimensions will have many values, so it is recommended to use the filters available in the Selections box to create a chart that helps you. Name Description Spend The Net Spend. This cannot be changed to a different measure. Country Calendar quarter in which the application usage took place. Application Application. Allocation Group Allocation Group. Only allocation groups assigned directly to the IMS user will be present in this report. Persona Unique persona attributed to the usage. Depending on the user's Connected status, this will either be an email address or a machine name. Usage Date The specific date during the quarter in which the usage was reported. Custom Chart Workflow Example Lets say your organization has implemented a rule that for a certain application, usage should be restricted to one user per day as much as possible. You want to quickly find users that could be significantly violating this rule. This is an example of a workflow that would help you do that Use the Product filter in the Filters box to select the Application (Product + Feature String) that has this rule. Use the Top Usage chart to identify the top users (a.k.a Personas) of this application. Click on the bar of the top five users in the Top Usage chart to filter the report by those users. Scroll back down to the Custom Chart and Toggle the Country dimension (the X-axis) to Usage Date. Toggle the Application dimension (the stacks) to Persona. The end result will be a bar chart that shows all of the days that at least one of those five users used that application. You can quickly identify days it was used by more than one user, and who those users were. Layout - Spend and User Days by Application These are three lists that display the amount of spend and user days by application for the selected usage quarter. They are separated by the usage interval, meaning that there is one chart each for Daily Quarterly Quarterly Subscription The plus icon next to the application name can be used to show the specific usage dates for that application. Name Description Application The Net Spend. This cannot be changed to a different measure. Usage Date The specific date during the quarter in which the usage was reported. Spend Net Spend. User Days A User Day is the unique combination of Persona and Usage Date. Layout - E365 Invoice These are the details about all of the application usages that make up this report. They are hidden by default but may be toggled on with the Show Details toggle. Name Description Country The Net Spend. This cannot be changed to a different measure. Usage Date The specific date during the quarter in which the usage was reported. Application Application. Persona Unique persona attributed to the usage. Depending on the user's Connected status, this will either be an email address or a machine name. Connection Status Connection Status of the Persona at the time the usage took place. A value of Connected, that indicates the user was logged in. A value of Not Connected indicates the user was not logged in. Usage Interval Indicates if the usage interval for the application is Daily, Quarterly, or Quarterly Subscription. Gross Gross Spend. Discount Discount applied to the Gross. Spend Net Spend. Currency Currency. IMSID IMS unique identifier.
↧
↧
Wiki Page: Daily Usage by Machine
Purpose View the duration of Bentley application usage by day and machine. All types of usage of any duration are included in this report, including Trial, Pre-Activation, and Evaluation. Roles Users with at least one of the following roles are able to access the reports: Admins Co-Admins Access Go to the Subscription Analytics Click on the Daily Usage by Machine . Filters Name Description Country CountryISO Date Range Preset and custom date ranges Product Product with ProductID Feature String Feature String Machine Machine Name Connection Status Indicates if the machine has gone through the process to become Connected Generation Product version Generation SELECTseries Product SELECTseries Server Type Server type of the usage such as Connect, Hosted, or Deployed Filter by Allocation Group Toggle that will display Allocation Group in the results and displays the Allocation Group filter Allocation Group Allocation Group Layout A list of the machines that have used Bentley applications and how long they were used on each day. Name Description Allocation Group Allocation Group Country Country ISO code Product Bentley Application Usage Date Usage Date Machine Name Machine Name. If the Machine has only ever been used from a Deployed server, the Machine Name will appear as “Deployed Machine” User IMS email address. Due to local legal regulations, Germany users will only have their IMS ID displayed. Duration Non-checkout Production duration. If the usage is from a Deployed machine, or if the usage is non-Producton (ex., Trial) the Duration will be populated with a 0. Format of D HH:MM.* Checkout Checkout duration. Format of D HH:MM* Total Sum of Duration and Checkout * Users Number of IMS users that were included in that usage. * Bentley’s usage logging system processes and stores data in 10-minute intervals. It is Bentley’s policy to use the 10 minute interval as our most granular time segment. All commercial programs are built using this base data or some higher level aggregate. We do not store exact start and stop times for applications. Other Language Sources Deutsch
↧
Wiki Page: Daily Usage by User
Purpose View the duration of Bentley application usage by user. Roles Users with at least one of the following roles are able to access the report: Admins Co-Admins Access Go to the Subscription Analytics reports. Click on the Daily Usage by User tile. Filters Name Description Country CountryISO Date Range Preset and custom date ranges Product Product with ProductID Feature String Feature String User Windows NT user name Filter by Allocation Group Toggle that will display Allocation Group in the results and displays the Allocation Group filter Allocation Group Allocation Group Layout - Summary This is a high-level summary of the usage during the date range. Name Description Days Number of days at least one user used a product. Users Number of users that used at least one product. Duration Duration of non-checkout usage in D HH:MM format.* Checkout Duration of checkout usage in D HH:MM format.* Total Sum of Duration and Checkout* Layout – Daily Usage by User This is a list of the machines that have used Bentley applications and how long they were used on each day Name Description Allocation Group Allocation Group Country Country ISO code Product Bentley Application Usage Date Usage Date User Name IMS email address. Due to local legal regulations, Germany users will only have their IMS ID displayed. Duration Non-checkout Production duration. If the usage is from a Deployed machine, or if the usage is non-Producton (ex., Trial) the Duration will be populated with a 0. Format of D HH:MM.* Checkout Duration of checkout usage in D HH:MM format.* Total Sum of Duration and Checkout* * Bentley’s usage logging system processes and stores data in 10-minute intervals. It is Bentley’s policy to use the 10 minute interval as our most granular time segment. All commercial programs are built using this base data or some higher level aggregate. We do not store exact start and stop times for applications. Other Language Sources Deutsch
↧
Forum Post: RE: H2S Modeling Workflow
Supplementary to my above message, I can't change my solver from GVF-convex (SewerCAD ) to SWMM. Please advise
↧
↧
Forum Post: is downloading any software from cloud service chargeable?
I have downloaded Plaxis 2D from Bentley cloud service and tried to use it, will it be chargeable, if yes pls. let me know the charges. regards Sukanta
↧
Forum Post: RE: CC is black!!
Hello Stuart, Thank you for contacting Bentley technical support, this is regarding your Service Request. Please check wiki for connection issues in the link below: communities.bentley.com/.../connection-client-fails-to-sign-in Also check for proxy configurations given in below wiki : https://communities.bentley.com/communities/other_communities/sign-in_assistance_and_web_services/w/wiki/36380/faq Also try to use Connection Client latest version 10.00.18.25 Regards, Sheetal Bhegade
↧
Wiki Page: IMS 2.0 Test Instructions
Testing IMS 2.0 Pre-Production Environment 1. Update hosts file on your local machine to direct to IMS 2.0 Note: You must have administrator privileges on your computer in order to edit the hosts file. Bentley offers a tool that can be used to automatically update the hosts file to point the domain https://ims.bentley.com to the IMS 2.0 environment. We recommend using this tool to switch to the IMS 2.0 environment for testing (click the Activate 2.0 button) and then switching back to the IMS 1.0 environment (click the Activate 1.0 button) when you complete your testing and are ready to resume your daily work. The tool can be downloaded from . Instructions to manually update the hosts file to direct traffic to IMS 2.0 is available on this wiki. 2. Test Federated Identity Sign-In Step 1: Open CONNECTION Client application. If you do not have the CONNECTION Client installed, you can download it from https://store.bentley.com/en/products/iware/1000CC--CONNECTION-client Step 2: Enter your federated email address and click the green Next button. Step 3: Verified you are signed in. You should see a screen that looks similar to the following image: Step 4: Report your results Please submit a Service Request by clicking and share your results with Bentley. Please note one of the following statuses in your Service Request Successful Login You were able to see the screen show in Step 3 above Domain not Federated If you see the following screen after entering your email address and clicking next, it means that your email domain is not recognized as being federated. Please submit a Service Request noting that you are seeing this sign-in screen. Not able to Sign In If you receive an error message, please submit a Service Request to Bentley and include the following: Screenshot of error message If you are able to successfully sign-in to CONNECTION Client after updating the hosts file to switch back to IMS 1.0 3. Test Managed Service Application (Managed Service Accounts Only) Step 1: Open Application and Sign-In Step 2: Report your results Please submit a Service Request by clicking and share your results with Bentley. Please note one of the following in your Service Request Successful Login You were able to successfully sign-in to your application Domain not Federated If you are prompted for a password after entering your email address and clicking next, it means that your email domain is not recognized as being federated. Please submit a Service Request noting that you are seeing this sign-in screen. Not able to Sign In If you receive an error message, please submit a Service Request to Bentley and include the following: Screenshot of error message If you are able to successfully sign-in to after updating the hosts file to switch back to IMS 1.0
↧
Wiki Page: Manually updating hosts file
Step 1: Identity the correct IPAddress for IMS 2.0 environment: Open Command Prompt – type CMD in the search window Ping IMS 2.0 – type ‘ping prod2-ims.bentley.com’ in the command prompt window The current IPaddress will be displayed in the response. Note this is not a static IPaddress and may change. Step 2: Update hosts file with IPAddress Open NotePad, NotePad++ or another text editor (be sure to right click on the program and choose ‘Run as administrator’ or you will not be able to save changes) Click open and navigate to %WinDir%\System32\Drivers\Etc\ Open the ‘ hosts ’ file (be sure that you have selected All Files (*.*) Add the following line to the hosts file: xxx.xx.xxx ims.bentley.com (where xx.xxx.xxx is the IPAddress from Step 1) Click File > Save Note: Do not click Save As, this will result in creating a new file hosts.txt and will not update the hosts file. NOTE: Do not forget to remove this entry from the hosts file when you have completed your testing.
↧
↧
Forum Post: New setup
How to get started. In a previous employment I used projectwise v8i as a user but with some admin rights. Having moved to a different company I discover that they have a licence for ProjectWise. Problem is that no one knows how to use it or even how to set it up. I believe that the company have an enterprise agreement, although not certain. Is there a guide on how to install, setup and configure ProjectWise. Not sure who I can contact for help. Really need to get everything working but not really sure how to start. Can anyone help?
↧
Wiki Page: Usage Details
Purpose View the product usage details down to the specific 10-minute intervals in which the usage began and ended. The first interval of a given usage is not included in this report. This report only includes Production usage; it does not include usage such as Trial or Pre-Activation. This report includes data for the past 90 days only . All date and times are based on UTC time. Roles Users with at least one of the following roles are able to access the report: Admins Co-Admins Access Go to the Subscription Analytics Click on the Usage Details Filters To get an accurate analysis of your peak application usage, the Country, Product, and Feature String (where applicable) filters should all be used. Name Description Country CountryISO Date Range Preset and custom date ranges Product Product with ProductID Feature String Feature String Machine Machine Name Filter by Allocation Group Toggle that will display Allocation Group in the results and displays the Allocation Group filter Allocation Group Allocation Group Layout - Application Usage by Hour Details This shows details of product usage down to the 10-minute interval. Intervals are pre-set 10-minute increments throughout the day. For example, 12:00 - 12:10 is the first interval. of the day 12:10 - 12:20 is the second interval, etc. This report uses these intervals to show the approximate start and stop time of product usages down to the 10-minute interval. It will not display to the exact minute or second. If a product was used from 9:02 - 9:06 AM, then this report will not display any usage because the first interval is removed. If a product was used from 9:02 - 9:16 AM, then this report will display a usage interval of 9:10 - 9:10 AM. This is because the first interval is still removed (9:00-9:09), and the usage ended before 9:20. Name Description Allocation Group Allocation Group Country Country ISO code Product (Feature String) Product name and Feature String Machine Machine name. If the Machine name is not available, the MachineID will display instead User Windows NT user name. If the user name is not available, the UserID will display instead. Web Login IMS email address. Due to local legal regulations, Germany users will only have their IMS ID displayed. Is Checkout Indicates if the usage was from a checked-out license Start Interval The interval in which the usage began.* End Interval The interval in which the usage ended.* * Bentley’s usage logging system processes and stores data in 10-minute intervals. It is Bentley’s policy to use the 10 minute interval as our most granular time segment. All commercial programs are built using this base data or some higher level aggregate. We do not store exact start and stop times for applications. Other Language Sources Deutsch
↧
Wiki Page: Frequently Asked Questions
Frequently Asked questions on topics that apply to multiple reports. I used a product this morning. Why isn't it in the report? The reports refresh only once per day. This means that it usually takes about a day for an action to be visible in a report. What timezones are the Usage Date and Usage Intervals in? All time components, such as Usage Date and Intervals, are UTC time. How do Allocation Group assignments work? You have two methods to allocation Bentley application usage to Allocation Groups Assign individual IMS users directly to an Allocation Group Map Activation Keys to Allocation Groups Application usage will map using one or the other method according to the following criteria of the usage: Subscription Entitlement Service All Subscription Entitlement Service usage, regardless of product type, only uses Allocation Groups assigned directly to the IMS user. Non-Subscription Entitlement Service - Connected User Non-SES usage for non-Web Applications on machines that have had the Connection Client installed and logged in use Allocation Groups assigned directly to the IMS user. If the IMS user is not in an Allocation Group, then the usage is allocated to the Allocation Group mapped to the Activation Key. Non-Subscription Entitlement Service - Non-Connected User Non-SES usage for non-Web Applications on machines that have NOT had the Connection Client installed and logged in use Allocation Groups mapped to Activation Keys only. Non-Subscription Entitlement Service - Web Applications Non-SES usage for web-based applications uses Allocation Groups mapped to Activation Keys only. E365 Program This is only applicable to accounts on the E365 program. All usage is only allocated to Allocation Groups assigned directly to the IMS user. I assigned some users or activation keys to Allocation Groups. Why isn't it in the report? The reports refresh only once per day. This means that it usually takes about a day for an action to be visible in a report. Why is there a user from another account in my report for an SES desktop application? When a user is logged in and using a product with Subscription Entitlement Service, that user will be in the report for the account he was a part of at the time of that usage. For example, John is working for Contracting Company in September. He uses an SES version of MicroStation. But in October, John's user account is moved from Contracting Company to Building Company. In November, Contracting Company runs their report for September. They will still see John's September usage because it belonged to them at the time the usage took place. Why do my filter selections keep changing? The filters in the reports will show you all of the available options you may select. If the value's cell is shaded with white, that means it aligns with your other current selections. If the value's cell is shaded with gray, that means it conflicts with one of your other current selections. The report will allow you to select the gray value, but it will override the conflicting selection from the other filter. In the following example, the Country selection is Singapore. SYNCHRO Pro - 2807 was used in Singapore, so it is shaded with white. 2D Dynamics Module HWL - 6128 was not used in Singapore, but was used in the United States, so it is shaded with gray. If the user selects 2D Dynamics Module HWL - 6128, then the filter on Singapore will be removed. Other Language Sources Deutsch
↧
Wiki Page: iTwin Design Review
The iTwin Design Review Wiki has moved here: https://communities.bentley.com/products/digital-twin-cloud-services/itwin-services/w/itwin-design-review-wiki iTwin Design Review is a cloud-based design review and collaboration tool. It allows users to easily share design files with colleagues to review and provide feedback. The simplified sharing capabilities and web-based model viewing make reviewing 3D models easier and more accessible than ever. iTwin Design Review can be accessed at review.itwin.bentley.com
↧
↧
Forum Post: CC still telling me that a program is available for upgrade when already installed.
Connection Client insists on letting me know that BV CE version 10.14.00.109 is available for upgrade when it is already installed. Why?
↧
Forum Post: License problem
Hello, I'm trying to change a trial version to a licensed one at I don't know how to do it.
↧
Forum Post: RE: License problem
Hello Luis, Follow the below steps to resolve the trial issue : 1. Sign-out for the CONNECTION client. 2. In Task manager, end task for both Bentley Connect client and Bentley Licensing Service for Windows. 3. Navigate to %localappdata%\Bentley and rename MySELECT.DB to .old. and %localappdata%\Bentley\Licensing LicenseService.DB to .old 4. Open CONNECTION client and sign-in. See if you see notifications. 5. Open Bentley Licensing Tool, see if it shows that you have signed now. 6. Follow the activation instructions given in the below support communities link; communities.bentley.com/.../how-to-activate-products-under-subscription-entitlement-service Regards, Sheetal
↧
Wiki Page: Microsoft ADFS Configuration for Bentley Federation
Configure Microsoft AD FS for use with Bentley Federated Identity Introduction This guide provides step-by-step instructions for configuring a basic Identity Federation deployment between Microsoft Active Directory Federation Services (AD FS) and Bentley's Identity Management System (IMS). The document is intended for server and active directory administrators with knowledge of ADFS. Prerequisites Federation with Bentley IMS requires the WS-Federation protocol with the SAML 2.0 token format. This guide assumes that your AD FS is properly setup on a SSL/TLS endpoint using HTTPS and the authentication address is accessible by your corporate users. Federation can only be configured for an email domain which is owned by your organization. This email domain can only be associated with a single Bentley account hierarchy. A Microsoft Windows Server with Microsoft AD FS and the latest operating system updates. Setup Step 1 - Download Bentley's Federation Metadata File Bentley's Federation Metadata XML can be downloaded from https://ims.bentley.com/FederationMetadata/2007-06/FederationMetadata.xml . DO NOT open the XML file in Notepad or make any edits to the document as it is signed. This file will be required for step 2.5. Step 2 - Register IMS as a Relying Party (RP) in ADFS 1. Open ADFS Management and navigate to Trust Relationships > Relying Party Trusts 2. Click Add Relying Party Trust 3. Click Start 4. In the Select Data Source screen, select the second option “Import data about the relying party from a file”. 5. Click Browse , select the FederationMetadata.xml you saved from step 1, and click Next . 6. On the next screen, enter a name in the Display name field and click Next. Enter Bentley IMS for the production environment 7. On the next screen, select the “ I do not want to configure multi-factor authentication settings for this relying party trust at this time ” radio button and click Next . Note, configuring multi-factor authentication is outside the scope of this document. 8. On the next screen, select the “ Permit all users to access this relying party ” radio button and click Next . 9. On the next screen, verify the Signature details shown are valid. Click Next . 10. On the final screen, leave the checkbox “ Open the Edit Claim Rules dialog for this relying party trust when the wizard closes ” checked and click Close . Step 3 - Setup Claims Issuance If the Edit Claim Rules wizard does not open automatically, access it from the AD FS Management application under AD FS > Trust Relationships > Relying Party Trusts . Click Edit Claim Rules ... on the right hand side. 1. On the Edit Claim Rules page, click Add Rule. 2. Select the claim rule template Send LDAP Attributes as Claims from the dropdown and click Next . 3. Select the attribute store Active Directory . Select the following LDAP Attributes and outgoing claims using the screenshot below as a reference. Notes: #1 – The Country attribute is typically stored in the LDAP database under an attribute named “c”, however in your it may be stored elsewhere, so verify the location of the country information for your tenant. If "c" is not in the drop-down list, and that is where your country information is stored, you must manually type “c” into the blank attribute box. Regardless of where it is stored in LDAP, the outgoing claim should be called “Country”. #2 – If you define “c” as the country attribute, you will also need to define the correct schema for the “c” attribute in the Claim Descriptions as seen below or it could cause the federation to fail: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/country #3 – You should send the e-mail attribute if you are using the email address as the unique identifier for your users, but use the UPN attribute and value instead if your users are identified by their UPN. The UPN claim syntax is as follows: LDAP Attributes Outgoing Claim Type User-Principal-Name UPN #4 – We suggest using e-mail address as the primary identifier, but if you need to use the UPN, do not send the email address attribute as well. Either the "UPN" or the "E-mail Address" claim should be sent - not both. #5 – After chosing to send either the "E-mail Address" or "UPN" claim, always send the NameID claim with the UPN. The NameID field is required regardless. 4. Click Finish when you have completed adding claim rules. 5. Using the Edit Claim Rules wizard, click Add Rule again. 6. Select Pass Through or Filter an Incoming Claim and click Next . 7. Enter Name Claim as the rule name. Select Name as Incoming claim type and choose Pass through all claim values . Click Finish . 8. Click OK to close the Edit Claim Rues dialog. Step 4 - Adjust the trust settings 1. Right click on Bentley IMS in the Relying Party Trusts pane and select Properties . 2. Click on the Endpoints tab. 3. Click on Add WS-Federation. 4. Type in the endpoint in the Trusted URL field. Make sure to check Set the trusted URL as default. Click OK . Enter https://ims.bentley.com/ for the production environment (must include the trailing slash) 5. Click on the Encryptions tab. Make sure that you do not have any certificate here for token encryption. 6. Click OK to close the Properties dialog. This completes the ADFS server configuration portion for Single Sign On with Bentley IMS using the WS-Federation protocol. Step 5 - Provide your Organization's Federation Metadata URL to Bentley Your organization's Federation Metadata URL is available in the AD FS Management Console. Browse to Service > Endpoints > Metadata > Type:Federation Metadata to find your federation metadata URL. You will need to provide your organization's Federation Metadata URL to Bentley. Once the Federation Metadata URL is provided, Bentley will configure your organization for federated identity in Bentley's Identity Management System.
↧
↧
Wiki Page: CONNECTION Client Inventory
Purpose View an inventory of the machines in your organization that have used Bentley applications within the past 60 days and whether they have Installed and logged into the CONNECTION Client Installed but not logged into the CONNECTION Client No evidence of CONNECTION Client installation This report is a true Inventory report. A machine is only considered to have used CONNECTION Client within the past 60 days if the machine has recorded usage within the past 60 days. If the machine has had usage of CONNECTION Client outside of the 60 day window, but not within 60 days, then that is what this report will reflect. Please note that this is different than the Earned Value Discount report, which takes greater advantage of forward-filling and back-filling to enhance your organization's change of receiving an Earned Value Discount. You can read more about this in Frequently Asked Questions . Roles Users with at least one of the following roles are able to access the report: Admins Co-Admins Access Go to the Subscription Analytics Click on the CONNECTION Client Inventory . Filters Name Description Country CountryISO Date Range P reset and custom date ranges Last Used Product (Feature String) For machines that have no evidence CONNECTION Client installation, the last Product (Feature String) that was used User IMS User Machine Machine Name Connection Status Indicates if the machine has gone through the process to become Connected Server Type Server type of the usage such as Connect, Hosted, or Deployed Layout - Summary A count of the machines distributed across their Connection Status and Server Type. There is a list version and a corresponding pie chart. Layout - No Evidence of CONNECTION Client These are machines that are in use at the organization that have not reported any use of CONNECTION Client. As machines become Connected, they will disappear from this list and be added to the CONNECTION Client Installed list. Name Description Country CountryISO Machine Machine Name User Windows NT User Last Used Product (Feature String) The Last Product (Feature String) that the machine used Last Usage The date on which the machine was last used Server Type Server type of the usage such as Connect, Hosted, or Deployed Connection Status No Evidence of Connection Client Layout - CONNECTION Client Installed These are machines that are in use at the organization that have reported use of CONNECTION Client. As machines become Connected, they will disappear from the No Evidence of CONNECTION Client list and be added into this list. To appear in these two categories, CONNECTION Client must have actually been used on the machine. Simply installing CONNECTION Client, but never opening it, will not cause a machine to move into a CONNECTION Client Installed category. Name Description Country CountryISO Machine Machine Name User Windows NT User Email IMS User email address, if a user has logged in Last Usage The date on which the machine was last used Version The version of CONNECTION Client that was last used Server Type Server type of the usage such as Connect, Hosted, or Deployed Connection Status Indicates either CONNECTION Client installed and logged in or CONNECTION Client installed but not logged in Other Language Sources Deutsch
↧
Forum Post: RE: CC still telling me that a program is available for upgrade when already installed.
Anyone?
↧
Forum Post: RE: CC still telling me that a program is available for upgrade when already installed.
Hello Stuart, Can you please confirm which version of Connection Client you are using? Please try to use latest version 10.00.18.25. 1. Sign-out for the CONNECTION client. 2. In Task manager, end task for both Bentley Connect client and Bentley Licensing Service for Windows. 3. Navigate to %localappdata%\Bentley and rename MySELECT.DB to .old. and %localappdata%\Bentley\Licensing LicenseService.DB to .old 4. Open CONNECTION client and sign-in. See if you see notifications. Regards, Sheetal
↧